Polymer80 PF940C Jig Kit For PF940C Frame Blanks

This jig kit is the essential tooling component required to complete a PF940C frame blank. Designed by Polymer80, this kit provides the precise machining guides and hardware necessary for finishing an 80% compact frame. Intended for use exclusively with PF940C frame blanks, this jig kit ensures proper alignment and consistent results during the final stage of frame completion. The polymer80 pf940c jig kit for pf940c frame blanks is a factory-direct solution from the original manufacturer, eliminating fitment guesswork and hardware sourcing issues.

Overview

The Polymer80 PF940C Jig Kit includes all of the alignment blocks, drill guides, and pin sets required to complete a PF940C frame blank. This jig set is CNC-machined to exacting tolerances, matching the specific geometry of the PF940C compact frame. Without this jig kit, the frame blank cannot be properly finished, as the drilling and routing operations require the guide channels and stop surfaces provided exclusively by this kit. As a dedicated component in the Polymer80 ecosystem, this jig kit supports the PF940C frame blank from initial indexing through final pin installation.

Features & Specs

• Precision-machined polymer jig body with hardened steel drill bushings for the PF940C frame blank rear rail module and trigger housing pin holes
• Includes stainless steel pin set: trigger pin, trigger housing pin, and front locking block pin, all dimensioned for the PF940C compact frame platform
• Integrated slide stop channel cutter guide and fire control pocket depth stop, eliminating the need for aftermarket templates or measurement tools

This kit is manufactured by Polymer80 and falls under their Frames category. The jig body is constructed from impact-resistant polymer with glass-fiber reinforcement. All drill bushings are press-fit and pre-aligned at the factory. The kit includes three alignment blocks that index to specific locations on the PF940C frame blank. The polymer80 pf940c jig kit for pf940c frame blanks ships as a complete assembly, requiring no additional modification to the jig components prior to use.

Who It’s For

This jig kit is intended for individuals who possess a PF940C frame blank and are performing the final machining operations to complete the frame. It is designed for use by experienced builders who understand the drilling, routing, and finishing processes required for 80% frames. The kit is appropriate for those who want to maintain OEM-spec tolerances on their PF940C build, as the jig replicates the factory drilling angles and pocket dimensions. This product is not compatible with frames from other manufacturers or with other Polymer80 frame models such as the PF940SC or PF940V2. The polymer80 pf940c jig kit for pf940c frame blanks is a single-use jig system; the polymer alignment blocks are designed to be consumed during the machining process and are not intended for reuse across multiple frames.

Shipping & FFL

This jig kit is not a firearm and does not require transfer through a Federal Firearms License (FFL) dealer. It is classified as a tooling and hardware kit. Standard shipping rates apply. All applicable federal, state, and local laws regarding the completion of frame blanks remain the responsibility of the purchaser. The purchaser must verify their legal ability to possess and complete a PF940C frame blank in their jurisdiction before acquiring this kit. No FFL transfer is required for this jig kit, but the frame blank itself is subject to all applicable laws and regulations.